Ball Valve Is A Rotational Motion Valve

Update:14-03-2020
Summary:

A ball valve is a rotational motion valve that uses a b […]

A ball valve is a rotational motion valve that uses a ball-shaped disk to stop or start fluid flow.

The ball, shown in Below Figure, performs the same function as the disk in the globe valve.

When the valve handle is turned to open the valve, the ball rotates to a point where the hole through the ball is in line with the valve body inlet and outlet. When the valve is shut, the ball is rotated so that the hole is perpendicular to the flow openings of the valve body and the flow is stopped.

Most ball valve actuators are of the quick-acting type, which require a 90° turn of the valve handle to operate the valve. Other ball valve actuators are planetary gear-operated. This type of gearing allows the use of a relatively small handwheel and operating force to operate a fairly large valve.

Some ball valves have been developed with a spherical surface coated plug that is off to one side in the open position and rotates into the flow passage until it blocks the flow-path completely.

Seating is accomplished by the eccentric movement of the plug. The valve requires no lubrication and can be used for throttling service.